Natural Gas Commercial Conveyor Oven Lincoln Impinger X2 3262-2

Description

Natural Gas Commercial Conveyor Oven Lincoln Impinger X2 3262-2
Natural Gas Commercial Conveyor Oven Lincoln Impinger X2 3262-2
Lincoln Impinger X2 Double Stack Natural Gas Commercial Conveyer Oven 3262-2
This unit is set up with a left to right belt direction.
Does not come with manual, installation kit or warranty.
Double your capacity with Impinger® X2 ovens. Each Impinger® X2 has two conveyors in each baking chamber and can be stacked either one or two ovens high. Their front removable panel allows for easier access to internal components. A double stack of ovens will provide four conveyor belts for cooking. Each belt may be split for more bake time flexibility. The 3262-2 has a 32" (813mm) wide conveyor belt and 62" (1575mm) long baking chamber, as well as a 3" (76mm) opening above the conveyor belt. The 3262-2 oven has in excess of 50% more capacity than the 3240-2, and 13% more capacity than competitive models on a belt-for-belt basis. Maximum Operating Temperature is 600º F (316º C) and Baking Time Range is 2.25 minutes to 16.0 minutes. 200,000 BTU/Hr.
FEATURES:
Impinger® X2 uses hot air under pressure which surrounds food with small jets of hot air. This allows for rapid heating, cooking, baking and crisping of foods, two to four times faster than conventional ovens, depending on food product cooked.
Uniform heating/cooking of food products offers a wide tolerance for rapid baking at a variety of temperatures.
Variable speed conveyors move products through the oven one after another, improving product flow during cooking and drastically reducing labor.
Safety of conveyorized product movement is a definite advantage over batch type ovens, as it eliminates the need for constant tending.
Customer specific air fingers on top and bottom allow for the heat to be adjusted and controlled by zoning.
Digital Controls:
The digital control panel is located at the back right of the oven and has power fan, burner and conveyor on-off switch. It also has one temperature control for the entire oven and conveyor speed controls for every belt. The LED readout displays actual cavity temperature in degrees (F° or C°), conveyor belt speeds and thermostat indicator light.
Unit weighs 1400lbs
Measures 61" x 60" x 104"
GAS SERVICE:
Gas Control system has a manual shut-off valve, internal pressure regulator (factory preset at 3 ½” water column/. 87 kPa or 8.70 mbar for Natural Gas, 10” water column/2.48 kPa or 24.87 mbar for LP gas), and an electric solenoid operated main gas valve. Heat is supplied by one (1) power burner rated at 200,000 BTU/Hr. (126MJ) with electronic ignition. Natural gas requires 8” WC mbar inlet with maximum allowable of 14” WC mbar. LP gas requires 13” with maximum allowable of 14” WC. Gas line from meter to ovens should be 2” for natural gas and 1 1/2” for propane. AGA/CGA design approved flexible connection to each oven must be ¾” NPT and length must not exceed 6 ft. (1829mm).
ELECTRICAL SERVICE:
Three Phase, 208/240V, 50/60Hz, 10Amp, 3 pole, 4 wire with ground NEMA L21-20P Plug.
Each oven requires standard 208/240V service. It is recommended that a separate 20 amp - circuit breaker be provided for each oven deck.
VENTILATION:
Ventilation is required. Local codes prevail. These are the “authority having jurisdiction” as stated by the National Fire Protection Association, Inc. in NFPA 96-1994. Consult Impinger X2 Installation and Operations Manual for ventilation recommendations.
SPACING:
The oven must have 1” (24.5mm) of clearance from combustible surfaces and 24” (610mm) clearance on both sides from other cooking equipment. A permanently installed oven requires approximately 3ft. (882mm) of clearance overall to allow for removal of the conveyor and protective guards for cleaning. The conveyor is removed from the front of the oven.
Terms & Conditions
Payment & Returns
Shipping
- no title specified
The unit
MUST
be installed by personnel who are qualified to work with plumbing, electricity and/or gas/LP.
Improper installation can cause serious injury to person and/or equipment. The unit MUST be installed in accordance with all applicable codes. Block20sales will
NOT
be held responsible for any damages to the item due to improper installation.
Block20sales will also
NOT
be held responsible for
ANY
type of refund due to damages incurred due to improper installation.
Terms and Conditions
Buyer is welcome to inspect equipment, prior to purchase.
Package discounts on multi-item purchases.
If you don't see what you are looking for call us and we will try to locate it.
We offer business liquidation services.
Warehouse Outlet -
Free Local Pick Up
Open To The Public for Equipment Inspection
Monday - Friday 8 - 5 pm or by Appointment
Customer Satisfaction
As a small business, we really do appreciate your purchase! If you are not completely satisfied; please give us a call and the opportunity to make things right.
We can be reached by phone at
605-987-SOLD (7653)
.
Inspection
Buyers are welcome to come and inspect any item prior to purchase.
Equipment Inspection
Used equipment is just that, it is an assembly of aging components that has been cleaned, inspected, perhaps painted, and had required repairs performed to make the piece of equipment functional and reasonably attractive. All items are sold as pictured, if you do not see it in the pictures do not assume that it is included. Each piece has been cleaned for cosmetic appearance, further cleaning may need to been done before installation.
Warranties
All sales are sold "As-Is." If you call us to discuss an issue we may be able to help remedy the problem.
- no title specified
Payment
Payment is expected immediately (or within 72 hours if purchased via auction) unless other arrangements are made between buyer and Block20sales prior to placing bids or offers.
Block20Sales accepts payments via PayPal, all major credit cards, and cash. Payments can also be made by mail with a check; there will be a minimum of 5 business days waiting period for clearing on all checks.
Items will only be shipped upon confirmation of funds.
Local pickup is also available. If an item is listed as an auction, Block20Sales reserves the right to end an auction early in the event of a local sale.
You
MUST
provide us with
ALL
of the following:
1.
Complete shipping address including business name.
2.
A contact person and phone number for delivery.
3.
You must specify if address is commercial or residential.
4.
Most equipment is shipped on a pallet. We need to know if you need a lift gate for delivery or if you have a dock or way of unloading.
We ship within 1-3 business days of confirmed funds unless otherwise noted.
Freight shipping to continental 48 States
Warranties
All sales are sold "As-Is." If you call us to discuss an issue we may be able to help remedy the problem.
Returns & Refunds
If you are not happy with your purchase and we are unable to make things right, then we will accept a return under specific conditions. If returns are necessary, buyer will be required to pay all return shipping fees and a 20% restocking fee on returns other than Item not as Described.
The buyer can refuse to accept the shipment, if they believe item is "NOT AS DESCRIBED" or damaged in shipping.
We cannot accept returns, after the item is accepted, taken off the pallet or installed.
Buyer is responsible for item and shipping costs during the return process.
Please contact us for return authorization.
Refunds will be issued once the item is received back, in the same condition, with no damages incurred while the buyer has possession, to include accidents or improper installation.
- no title specified
Freight Shipping: Inspection & Damages
Every freight shipment is insured. But in order to collect the insurance on damaged goods the receiver Legally, when Block20Sales signs the shipment over to the freight company, the freight company owns it. When you receive the item and sign for it, you own it. Therefore it is imperative that you carefully inspect your shipment for any damage. We specifically include a large shipping sticker that asks the buyer to examine the freight before accepting it.
You
MUST
inspect the shipments
BEFORE
signing for it!
If there is any damage at all you must note the damage on the freight bill. This is the only way you will be compensated for the damage.
If there is damage, you have two options:
1. You can note damage on the freight bill and accept the item anyway
2. You can refuse the shipment.
99% of freight damage is cosmetic. If you sign the freight bill damaged then the freight company may replace your item, approve reimbursement for parts and repair, or provide compensation depending on the damage to your item. This is often the best option if you need to get your item operational and the damage is cosmetic. If you refuse the shipment it will be returned to us. This is usually the best option if your shipment is damaged beyond repair. If you accept your shipment in a damaged state it is very important that you call the freight company immediately to schedule an inspection and file the freight claim, you should take good pictures from different angles of the item and the packaging, and you should save all packaging material.
Freight companies are able to deny millions of dollars in damages because items were not inspected at the time of delivery and were not marked as "Damaged" on the bill of lading. If your item has been crated, please expect to uncrate it and inspect it before the driver has left and before you sign for it.
For freight deliveries: A driver is obligated to wait. If he or she tries to rush you or you are in any way unhappy with the delivery, ask to speak to his or her dispatcher.